Desktop Metal Company Overview
Desktop Metal is accelerating the transformation of manufacturing with end-to-end metal 3D printing solutions. Founded in 2015 by leaders in advanced manufacturing, metallurgy, and robotics, the company is addressing the unmet challenges of speed, cost, and quality to make metal 3D printing an essential tool for engineers and manufacturers around the world.
Since its inception, the company has raised $438 million in financing with a portfolio of strategic partners and investors, including Ford Motor Company, GV (formerly Google Ventures), GE Ventures, BMW iVentures, Koch Disruptive Technologies, Lowe’s, New Enterprise Associates (NEA) and more. In addition, Desktop Metal has been selected as one of the world’s 30 most promising Technology Pioneers by the World Economic Forum and named to MIT Technology Review’s list of 50 Smartest Companies. The company has also been named one of the 2018 Best Places to Work by the Boston Business Journal and a 2017 Top Place to Work by the Boston Globe.
Located just outside of Boston, Desktop Metal is continuing to grow its team of experts and is looking to hire curious, passionate and driven engineers, scientists, and designers.
Jobs at Desktop Metal
CEO and Co-Founder
Ric Fulop is the CEO and co-founder of Desktop Metal, a company committed to accelerating the transformation of manufacturing with end-to-end metal 3D printing solutions. Founded in 2015 by leaders in advanced manufacturing, materials science, and robotics, the company is addressing the unmet challenges of speed, cost, and quality to make metal 3D printing an essential tool for engineers and manufacturers around the world.
Prior to founding Desktop Metal in October 2015, Ric was a General Partner at North Bridge, a VC fund with $3 billion under management, for five years following a fifteen-year career as an entrepreneur. Fulop is the founder of six technology companies, including A123 Systems, Boston's largest IPO in the past decade and one of the world’s largest automotive lithium ion suppliers with revenue exceeding $500M in 2016. At North Bridge, Ric led the software and 3D investing practices, and was an early stage investor and board member in Dyn (acquired by Oracle for $600 million), Onshape, MarkForged, Salsify, Lytro and Gridco.
Ric is a former Board Member of the Electric Drive Transportation Association and holds an MBA from the MIT Sloan School where he was a Sloan Fellow.
Co-Founder and CTO
Jonah Myerberg is a Co-founder and Chief Technology Officer at Desktop Metal where he is responsible for leading the technical direction of Desktop Metal’s 3D printing solutions. Prior to joining Desktop Metal in 2015, Myerberg held senior positions with a variety of organizations focused on high performance battery development, including Renovo Motors and Boston Impact, which he founded, and A123Systems. At A123Systems, Myerberg established and led the motorsports business unit which focused on the development of high performance batteries. His products were adopted by the majority of Formula One teams including the McLaren, Force India, Mercedes Benz, RedBull and other high profile motorsports teams like the Porsche 919 team which won the 24 hours of Le Mans in 2015 and 2016. He was also a race engineer for Porsche on the 919 team and for the Mahindra on their Formula E team. Additionally, he helped launch Gradiant Corp., where he managed the deployment and operation of large scale water desalination plants that converted fracking water into fresh water.
Myerberg earned his B.S. in Mechanical Engineering from Lehigh University and his M.S. in Mechanical Engineering and Manufacturing from Johns Hopkins University.
Ely Sachs, Ph.D.
Emanuel “Ely” Sachs, a pioneer of 3D printing, is the inventor of binder jet printing and a co-founder of Desktop Metal, a company committed to accelerating the transformation of manufacturing with end-to-end metal 3D printing solutions. Prof. Sachs is also a professor of mechanical engineering at MIT.
Founded in 2015 by leaders in advanced manufacturing, materials science, and robotics, Desktop Metal is addressing the unmet challenges of speed, cost, and quality to make metal 3D printing an essential tool for engineers and manufacturers around the world. As a visionary and inventor of the MIT 3D printing process and binder jet printing, Prof. Sachs has played a key role in the development of Desktop Metal’s mass production system, which builds metal parts in a matter of minutes instead of hours with high precision, single-pass technology.
At MIT beginning in the late 1980s, Prof. Sachs became a visionary in rapid prototyping. With colleagues, he developed the concept of 3D printing, ultimately allowing engineers to create functional parts rather than models or patterns for prototyping and testing, as well as for creating finished product components. 3D printing technology has since been applied to a wide variety of systems and application areas including metal end-use parts. His work in this area yielded more than 40 patents and launched a brand new industry.
Prof. Sachs became a member of the MIT faculty in 1986. In addition to 3D Printing, Prof Sachs is also known for his invention of conformal cooled molds and contributions to the manufacturing of photovoltaics, particularly for the invention of processes which make silicon wafers directly from molten silicon with no sawing required. He has co-founded several companies in this field including 1366 Technologies Inc, of Bedford, MA. He is also known for his work on process control of microelectronic manufacturing. He has been recognized for pioneering new approaches to teaching undergraduate education, focusing on active, hands-on participation by students in the discovery of knowledge. Sachs’ numerous honors and awards include membership in the National Academy of Engineering, the Ruth and Joel Spira Award for Distinguished Teaching in 1995; the Institute of Corrosion’s T.P. Hoar Award in 2001; the R&D 100 Award in 2004; and the TMS Champion H. Mathewson Award in 2006.
Sachs earned his SB, MS and Ph.D., all in mechanical engineering and all from MIT. He has authored more than 110 technical papers and holds more than 55 patents.
Co-Founder and VP, Software Development
Rick Chin is a co-founder and Vice President of Software Development at Desktop Metal, where he is responsible for the development of a robust, effortless software platform for Desktop Metal’s 3D printing systems.
Chin is a veteran of CAD software beginning his career at Unigraphics and Parametric Technologies Corporation. He was the 10th employee at Solidworks and was responsible for the eDrawings product which has several million users. Immediately prior to co-founding Desktop Metal in 2015, Chin served as Director of Product Innovation at DS SolidWorks, where he led the team focused on the development and implementation of an Augmented Reality (AR) app for product design. Additionally, he helped launch the SolidWorks SustainabilityXpress product, enabling engineers to improve the environmental impact of their designs. Chin was also the founder of Xpress3D, a pioneering marketplace for 3D printing services acquired by Stratasys which served as the foundation for Redeye Parts/Stratasys Direct.
Chin earned his B.S. in Mechanical Engineering from the New Jersey Institute of Technology. He currently holds five U.S. patents for CAD modeling and related features.
Christopher A. Schuh, Ph.D.
Christopher A. Schuh is a co-founder of Desktop Metal, where he has helped guide the company’s advances in materials science. A leading expert in metallurgy, Professor Schuh also serves as the Department Head and the Danae and Vasilis Salapatas Professor of Metallurgy in the Department of Materials Science and Engineering at MIT.
Prof. Schuh earned his B.S. degree from the University of Illinois at Urbana-Champaign and his Ph.D. from Northwestern University. He has published more than 220 papers and dozens of patents, and received a variety of awards acknowledging his research accomplishments, including his appointment as a MacVicar Fellow of MIT, acknowledging his contributions to engineering education, and his election as Fellow of The Minerals, Metals, and Materials Society. In addition to Desktop Metal, Prof. Schuh has co-founded a number of metallurgical companies, including Xtalic Corporation and Veloxint Corporation.
A. John Hart, Ph.D.
A. John Hart is a co-founder of Desktop Metal. His expertise in the intersection of precision machines, materials science and additive manufacturing have been instrumental in advising Desktop Metal on the design and mechanics of its rapid prototyping printer. In addition, Prof. Hart serves as Associate Professor of Mechanical Engineering at MIT where he leads the Mechanosynthesis Group. At MIT, Prof. Hart’s research focuses on advancing the science and technology of manufacturing, including additive manufacturing.
Prof. Hart has received numerous prestigious awards recognizing his accomplishments in research and teaching, and his impact on the development of innovative materials and manufacturing technologies. He has Ph.D. and S.M. degrees from MIT, and a B.S.E. degree from Michigan, all in Mechanical Engineering.
Yet-Ming Chiang, Sc.D.
Yet-Ming Chiang is a co-founder of Desktop Metal. As one of the top battery experts in the world, as well as a leading materials scientist, Prof. Chiang has been integral in Desktop Metal’s development of an office-friendly metal 3D printing system, as well as building out the company’s materials science team. Prof. Chiang is also the Kyocera Professor in the Department of Materials Science and Engineering at MIT, where his research focuses on the design, synthesis, and characterization of advanced inorganic materials and related devices.
Prof. Chiang earned his SB in Materials Science and Engineering and his ScD in Ceramics, both at MIT. He has published approximately 200 scholarly articles and a widely-used textbook on ceramic materials, and holds about 20 issued patents and 30 pending patent applications (excluding substantially identical foreign filings).
Peter Schmitt, Ph.D.
Peter Schmitt is the Chief Designer at Desktop Metal, a company committed to accelerating the transformation of manufacturing with end-to-end metal 3D printing solutions. Founded in 2015 by leaders in advanced manufacturing, materials science, and robotics, the company is addressing the unmet challenges of speed, cost, and quality to make metal 3D printing an essential tool for engineers and manufacturers around the world.
At Desktop Metal, Schmitt leads the Industrial Design team responsible for designing the company’s metal 3D printing systems. Prior to joining Desktop Metal in 2015, Schmitt founded Original Machines Studio, a design firm dedicated to the idea of “Form Drives Function.” At Original Machines Studio, Schmitt’s work addressed contemporary challenges in digital fabrication and 3D printing: break away from old approaches to printing, reduce the inherent complexity and enable larger and more diverse audiences to claim authorship of physical, mechanical and robotic things. Previously, Schmitt served as Director of Design at General Sensing.
Schmitt earned his Ph.D. in Media Arts and Sciences from the MIT Media Lab and his Diploma in Fine Art, Sculpture, from the Academy of Fine Art in Düsseldorf.
VP of Engineering
Matt Verminski is Vice President of Engineering at Desktop Metal where he leads the company’s growing engineering team, comprised of more than 80 engineers. Together they are responsible for the development of the Desktop Metal’s metal 3D printing systems, DM Studio and DM Production. Prior to joining the company in 2015, Verminski was an initial team member and VP of Hardware at Kiva Systems (acquired by Amazon for $775M and is now Amazon Robotics). There he shepherded multiple generations of autonomous robotic systems from concept to volume production. Previously, he co-founded and led systems engineering for Mimio and was an early team member at PowerAdvocate.
Verminski earned his MS in Electrical Engineering from MIT and BS in Computer Engineering from Tufts. He currently holds 24 U.S. patents primarily in the areas of robotics and virtual transcription, with more pending.
Welcome to Desktop Metal!
Our headquarters in Burlington has a cutting-edge, Silicon Valley feel in an open office environment.
The redesign of our office space reflects quite a bit of metal - the foundation of our company - as well as raw materials such as wood, brick, and steel I-Beams as accents.
We have plenty of collaborative spaces for one-on-one or group meetings.
The open environment has soaring ceilings, breakout spaces and writable walls throughout.
Soft, home-like furnishings add balance to the industrial look of the office.
Dynamically angled lighting creates interest and movement.
With the open office structure, employees are able to stop by each other's desks to frequently collaborate throughout the day.
Employees enjoy many perks at Desktop Metal, including catered lunch several days a week.
There are also picnic tables, Adirondack chairs and a grill out back for employees to cook and enjoy their lunches when there's good weather.
The bike wall is always packed during the spring and summer months.
We offer employees a competitive salary and benefit packages, unlimited vacation time and access to the latest in technology to enhance remote working capabilities.
Sometimes we have pretty incredible speakers drop by the office, like former Vice President Al Gore.
As a metal 3D printing startup we're, of course, always printing new parts.
Parts are printed right here in our Studio System Print Farm.
But, we also offer software products, like our generative design program Live Parts.
Our materials scientists have helped to establish the foundation for our technologies.
Employee workstations are adjacent to our lab space, making collaboration easy and efficient.
Large glass windows connect the two spaces and serve as a conduit for cross-functional engagement.
The lab and Part Farm are where our testing and prototyping occur.
Having won numerous awards, including being named to MIT Technology Review’s list of 50 Smartest Companies in the world, our employees take pride in working here on some of the world's most innovative metal 3D printing technologies.
Houghton Mifflin Harcourt's corporate headquarters are located right in Downtown Boston. We had a chance to see how their employees "stay curious," as per the statement which is proudly displayed in their office.
BHE has grown substantially over the past several years and has moved into a new office in Boston's Financial District to accommodate its rapid expansion. The company's new offices are modern in every sense of the word, featuring the usual open and collaborative spaces and state-of-the-art meeting rooms.
Privy recently moved into new offices near South Station and we had a chance to take a look inside. During our visit, we certainly witness a very team-oriented atmosphere. Don't miss the in-house video studio and the employee photo wall!
Facebook Boston's growth is continuing. This year, the company unveiled its brand new 130,000 square foot office located at 100 Binney Street in Cambridge. Facebook Boston currently has 200 employees working out of this location and there's plenty of room for growth, as the space is built to hold 600 people.
PatientPing moved into their new office in downtown Boston last November. The office is bright and sunny with plenty of spaces for collaboration. Their personalities and brand colors are represented with team photos and pops of coral and blue throughout the office.
Lose It!'s headquarters are located near the Boston Common. One cool idea that stands out is how they move employees' desks every three months, so you get to know everyone better. The offices also feature a ski lodge-styled quiet room.
Formlabs' Somerville offices feature many of their products and favorite prints on display...with some of them being made by employees themselves (a perk of working there!).
Numerated features an open office and catered lunches to keep their Numerators (what they call their employees) working together and happy.
O'Reilly Media's beautiful red and white offices feature a game room designed for their weekly ping pong tournaments.
Akumina's offices are located in downtown Nashua, New Hampshire and during our tour, we saw plenty of Akuminites (what the company calls their employees) in action.
BitSight's new offices are in the R2-D2 building at 111 Huntington Ave. The company has an incredible-looking space and catered lunches for their team members.
TimeTrade has a beautiful industrial-designed office and rooms for employee Game Nights. Also, their conference room names are music-oriented.
CyberArk's offices in Newton feature a completely renovated, not to mention nice-looking, lobby. The offices house employees working hard in the meeting rooms as well as a few getting competitive with foosball.
DraftKings occupies 105,000 square feet of space, which is the largest single-floor office plan in Boston. From the breathtaking entrance... to sports-themed huddle spaces... to meeting spaces named after famous sports athletes and tech entrepreneurs... to the DK café which mimics a football field... there is so much to see!
PathAI moved from Cambridge to Boston and their offices give employees plenty of room to collaborate... and play a few rounds of Super Smash Bros.
Aside from giving their employees a great view of the Back Bay, OM1 has a sharp, blue-colored office with tons of open space and huddle rooms.
Buildium has been expanding aggressively and to facilitate this growth, the company moved into a new office at 3 Center Plaza.
Located not too far from the Downtown Crossing T stop is Panorama Education's offices which feature meeting rooms named after school subjects and a wall featuring the "Pets of Panorama."
Tamr's offices are located in Cambridge and it gives its employees great views of Harvard Square.
The offices of Datto are located at 50 Milk Street and their lobby is a celebration of their decade-plus lifespan.
Desktop Metal's Burlington offices feature their 3D printing machines in action in a collaborative office.
Boston Digital's rebranded headquarters are in the Schrafft's Center in Charlestown and have a bright, orange-color scheme.